WOODS VACUUM LIFTER - 8 CUP
MRTA8
Please register or log in to place an order.
Powered Vacuum Lifters
With three frame configurations, 90 degree tilt and continuous 360 degree rotation, these vacuum lifters deliver maximum versatility and range of motion in the factory or on the construction site. All new models sold by Glasscorp have the dual vacuum system as standard. The dual vacuum system features two vacuum line circuits, allowing the lifter to maintain the vacuum level for one circuit even if an unexpected vacuum loss occurs in the other one. This system is designed to reduce the risk of falling loads, which could result from breakage or other accidents that compromise one area of the vacuum system. In addition it features audible and visible alarms that warn the operator whenever the vacuum level is not sufficient for lifting the maximum load weight.
Features
- 635kg capacity with 8 cups on smooth, flat, non-porous surfaces (please contact Glasscorp for recommendations on other surfaces)
- 280mm (11'') diameter vacuum pads
- Manual rotation, 360 degree edgewise with locking at edge quarter
- Manual tilt, 90 degree between upright and flat with automatic latching in upright position
- Three configurations all from the same unit
- Intelli-Grip Technology
- Dual vacuum system
- High-flow vacuum pump
- Onboard battery and charger
- Battery energy gauge
- Low vacuum warning buzzer
- Power loss warning buzzer
- Green lift light
- Vacuum gauges
- Vacuum line filters
- Vacuum reserve tanks
- Spring-mounted vacuum pads
- Four extension arms
- Blow-off for quick release
- Two-action, push button release
- Plastic shipping and storage case
Available options
- Forklift adapter
- Adaptable length lift bar
- Long extension arms
- Extensions for movable pad mounts
- Individual vacuum pad shut offs
- Closed cell foam pad rings
Applications
- For smooth, flat, non-porous surfaces up to 635kg
Notes
- Customers are required to carry out servicing and testing as outlined in the comprehensive instruction manual supplied
- Glasscorp is set up to handle scheduled servicing, load testing and annual certification
- Customers are responsible for ensuring they meet all legal and health and safety requirements in their factory's and on construction sites etc
- There are many options and models available. For further information or an arrangement to view one of these machines, please contact one of our sales team at Glasscorp Ltd
