MILWAUKEE M18 FUEL 2 PIECE POWER PACK

This kit includes a M18 FUEL 13mm Hammer Drill/Driver, a M18 FUEL 1/2″ Compact Impact Wrench with Friction Ring, two M18 REDLITHIUM 5.0Ah Batteries, and a M12 & M18 Rapid Charger.

M18 FUEL 13MM HAMMER DRILL/DRIVER (M18FPD30)

The M18 FUEL 13mm Hammer Drill Driver delivers the capability to drill large holes at high speed into the densest materials. The cordless drill is a compact design and solution, featuring AutoStop Control Mode for Enhanced Safety. The POWERSTATE Brushless motor delivers the most power under load to complete 2-9/16″ Self-Feed holes in dense woods for increased productivity. At only 175mm in length, it provides maximum access and manoeuvrability in tight spaces. The AutoStop Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up. The REDLINK PLUS intelligence ensures maximum performance and protection from overloads, heating, and over-discharge whilst the all metal ratcheting chuck provides increased grip strength, durability, and corrosion resistance.

Features – M18FPD30

• POWERSTATE Brushless Motor delivers 158 Nm of Max Torque with 2,100 RPM and 33,000 BPM
• Redesigned trigger mechanism with improved fitment and smoother acceleration provides the ultimate trigger control
• Offers an enhanced safety control mode, AUTOSTOP, preventing over-rotations in bind-up situations
• New M-Clutch design enables the tool to handle a wider range of torque settings with improved drilling and fastening performance

Specifications – M18FPD30

• PLATFORM: M18 FUEL
• TORQUE: 158 Nm
• RPM: 0 – 500 / 0 – 2,100
• BPM: 0 – 33,000
• CHUCK TYPE: 13mm Metal Chuck
• LENGTH: 175mm
• WEIGHT: 1.5kg
• WARRANTY: 5 Years

Includes – M18FPD30

• (1) M18 FUEL 13mm Hammer Drill/Driver [M18FPD3]
• (1) Bit Holder
• (1) Side Handle
• (1) Belt Clip

M18 FUEL 1/2″ COMPACT IMPACT WRENCH WITH FRICTION RING (M18FIW2F12-0)

The M18 FUEL 1/2″ Compact Impact Wrench with Friction Ring delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE 1/2″ Compact Impact Wrench with Friction Ring has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM battery pack (not included) fits all M18 tools, delivering more work per charge and more work over the life of the pack.

Features – M18FIW2F12-0

• Friction ring ensures quick and easy socket changes
• POWERSTATE Brushless Motor delivers up to 339 Nm of nut-busting torque
• 4-Mode DRIVE CONTROL provides control over output speed and power
• Auto Shut-Off Mode prevents over tightening and increases productivity by applying no more than 27 Nm of torque
• Bolt Removal Mode delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
• 124.5 mm in length for maximum access in tight spaces
• Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
• Works in up to 69kV environments
• REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge

Specifications – M18FIW2F12-0

• PLATFORM: M18 FUEL
• ANVIL TYPE: 1/2″ Square with Friction Ring
• NUT BUSTING TORQUE: 339 Nm
• FASTENING TORQUE/; 339 Nm
• IPM: 0 1,000 / 0 2,400 / 0 3,500 / 0 3,500
• RPM: 0 900 / 0 1,650 / 0 2,400 / 0 2,400
• DRIVE CONTROL: 4-Mode with Auto Shut-Off Mode & Bolt Removal Mode
• LENGTH: 124.5 mm
• WEIGHT: 1.1 kg (Tool Only)
• WARRANT: Y5 Years
• TORQUE LEVEL: Compact

Includes – M18FIW2F12-0

• (1) M18 FUEL 1/2″ Compact Impact Wrench with Friction Ring (M18FIW2F12-0)
• (1) Belt Clip

M18 REDLITHIUM 5.0AH BATTERY (M18B5)

The M18 REDLITHIUM 5.0Ah Battery features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18 REDLITHIUM 5.0Ah Battery features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimising heat, and prevents pack failures from vibration or drops. This unique to MILWAUKEE design also allows the battery to operate in extreme cold weather conditions (below 0°F/-18°C). Managed by MILWAUKEEs exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage. It also provides full system compatibility with 120+ M18 cordless solutions. Upgrade to the M18 REDLITHIUM 5.0Ah Battery to instantly increase the run-time and durability of your M18 cordless tools.

Features – M18B5

• Versatility: Powers more than 250+ MILWAUKEE M18 cordless power tools
• REDLINK intelligence. Provides optimised performance and over load protection
• Best in class construction. Offers long lasting performance and durability
• Fuel gauge on board. Displays remaining run time for less down time on the job

Specifications – M18B5

• PLATFORM: M18
• AMP HOUR: 5
• VOLTAGE: 18V
• WARRANTY: 2 Years
• WEIGHT: 720g

M12 & M18 RAPID CHARGER (M12-18FC)

The M12 & M18 Rapid Charger charges packs up to 40% faster, reducing downtime and maximising productivity. The charger accepts all M12 and M18 batteries, providing an upgrade for both systems. Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimise the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80% charge, providing confidence that a substantial amount of work can be completed without waiting for a full charge.

Features – M12-18FC

• Charges batteries up to 40% faster
• Charges all M12 and M18 batteries
• Sequential charging: automatically charges the second inserted pack once the first pack is fully charged
• REDLINK Intelligence: charger communicates with the battery pack to ensure optimum performance and extend life
• M18 REDLITHIUM 2.0 Ah / 4.0 Ah / 5.0 Ah battery packs recharge in 27 min / 48 min / 60 min or less
• M18 REDLITHIUM HIGH OUTPUT 3.0 Ah / 6.0 Ah / 8.0 Ah / 12.0 Ah battery packs recharge in 35 min / 65 min / 83 min / 130 min or less
• M12 REDLITHIUM 2.0 Ah / 3.0 Ah / 4.0 Ah / 6.0 Ah battery packs recharge in 30 min / 46 min / 60 min / 103 min or less

Specifications – M12-18FC

• PLATFORM: M18 / M12
• VOLTAGE: 12v and 18v
• WEIGHT: 0.8kg
• WARRANTY: 2 Years

Notes

• Customers should independently determine the suitability of this product for their specific purpose prior to use