GLASS ETCHING SYSTEM – GEL (STEP 3)
Please register or log in to place an order.
Glasscorp Glass Etching System is an easy to use, portable, fully mobile and no mess system. It utilises the latest in chemical techniques, providing a way to appropriately mark and identify glass to meet legal requirements. It has a low setup cost and no compressor is required. With this system there is no risk of scratching aluminium or other forms of paintwork. The computer generated stencils can be customised to meet customer requirements.
The system features a 4 step process:
- Step 1 – Prepare Glass (IPA) and Apply Spray (ETCH-SP)
- Step 2 – Apply Stencil (ETCH-S)
- Step 3 – Apply Gel (ETCH-G)
- Step 4 – Remove Stencil and Clean up
Caution: Do not use if gel becomes dark as its viscosity and/or effectiveness may change
Application Instructions
- Clean the glass surface to be etched using the Two Cloth Cleaning Method, using Isopropyl Alcohol (IPA) with Glasscorp Rags or WypAll Wipers. Spray surface (or on the shiny side of the Stencil) with the Step 1 Spray (ETCH-SP). DO NOT allow the spray to evaporate before moving to Step 2.
- Place the shiny side of the Stencil (ETCH-S) onto the glass (shiny side DOWN). Force out residual liquid or any bubbles with the card. Let the Stencil dry for 2 minutes to fully adhere.
- Dab the Step 3 Gel (ETCH-G) on top of Stencil. Dab and repeat with 2-3 coats, ensuring the gel is away from the stencil edge. Leave for 5 minutes.
- Remove the Stencil using the card to lift the corner, enabling it to be removed in one motion. Remove all remaining gel using IPA and the Two Cloth Cleaning Method.
Click here: Application Instructions including photos of each step
Features
- 45ml
- Bottle with dabber head
- Easy to use
Applications
- To appropriately mark glass for identification to meet legal requirements
Notes
- It is the customers sole responsibility to ensure the text displayed on the stamp accurately represents the required standards of the glass. The NZ Building Code requires that safety glass be permanently stamped with – name or registered trademark of the manufacturer or supplier, type of safety glass, standard to which the glass has been manufactured and tested, and license or ID number of the third-party certifier
- Customers should independently determine the suitability of this product for their specific purpose prior to use







