MIRROR MOUNTING TAPE 0.8mm x 24mm x 66m
VT2N
Please register or log in to place an order.
Mirror Mounting Tapes, Mirror Mounting Tapes, Mirror Mounting Tapes
The double sided mirror mounting tape is a closed-cell polyethylene foam, coated on both sides with a modified acrylic adhesive.
Features
- Dimensions of tape - thickness x width x length of roll
- New adhesion formulation
- Higher adhesion level
- Superior application in colder climates
- Use in conjunction with Tuf As Nails (TAN) or Simson 70-03 (MS703G) mirror adhesives
- Not recommended for mirrors installed on ceilings
- Not recommended for vinyl-backed mirrors
- Custom widths available on request
Installation Instructions
- For installing mirrors on vertical walls Glasscorp recommends 24mm wide mirror tape and a tape and glue thickness of between 1.6 and 3mm. As a guide use 5 strips of double sided tape vertically per 1.0m²
- Mirror tape should be applied in vertical lines as tape applied horizontally will gather moisture and not allow circulation of air. This may lead to corrosion of the mirror backing
- Mirror adhesive (glue) contact area should be greater than 0.2m² per 1.0m²
Notes
- Mirror tape is to be used in conjunction with a mirror mounting adhesive. Mirror tape should not be used to fix mirrors on its own
- Customers should independently determine the suitability of this product for their specific purpose prior to use
