Glasscorp Case Studies

Auckland Council is funding the restoration project as part of the long-term plan for this iconic Auckland asset. Dowsil 688 was used for the weather sealing on the window frames and Dowsil 790 for the clock.

Kimberly-Clark are committed to aggressive, Science-based Target initiative (“SBTi”) approved GHG emissions reduction goals aligned with the Paris Climate Agreement. Comprehensive climate objectives across 4 decarbonization strategies.

Invisible Shield Pro 15 can be used as the protective coating and recommended using it alongside Repel Glass & Surface Cleaner. A complimentary bottle of Repel was provided with each installed shower to ensure proper maintenance.

Glasscorp Glass Edge Protectors can be placed on the edge of the glass to provide a cushion to protect against damage. It also provides protection to staff. The blue edge protectors are a bright blue colour that is easily visible. The foam is pre-slit for easy application, and removes the need to use a knife to slit the foam, further improving health and safety.

Smartlift provides a safe and efficient solution for lifting a large number of glass panels. Glasscorp can install an alternative pad configuration placing the vacuum cups into an in-line configuration. Allowing for glass with a smaller width to be lifted and installed.

The range of Pet-Corp pet doors is excellent, with a great variety of single and dual glaze options as well as colour choices. Installation is straightforward, and the design choice to have your standard glass-fitting cat door fit both the 245mm and 267mm cut-outs was a stroke of genius.

The TE105 Double-Sided A-Frame Trolley provided a practical and efficient answer to these challenges. Its wheeled design allowed it to be moved easily around the factory and positioned directly beside vans or trucks to streamline loading and unloading. The double-sided frame enabled multiple jobs to be stored on a single unit, freeing up valuable space and improving workflow efficiency.

The Backing Rod Reel Stand provides a solution to the demands of structural glazing. The stand can store and dispense multiple Backing Rod Reels and sizes. It’s rotating reel design allows a smooth dispensing with controlled friction to prevent unspooling. Also serves as a convenient mobile workstation to hold tools and consumables.

The GV35 (Towa Activgrip Kunai 535) exceeded the performance for all glass processing operations within the factory. It improved efficiency, simplified procurement, and ensured consistent protection across all tasks.

One Clean and One Seal provides a versatile fabrication system for both the small joint and backing sealant providing positive adhesion to a large range of materials including aluminium and plastic. The system provided both environmental benefits given its low VOC (volatile organic compounds).

Dowsil 650+ can be exposed to wind, rain, dust and building construction products for up to 1 year after application. The product is designed to peel off easily in one sheet for simple disposal. Dowsil 650+ is a water based product and can be disposed oof in the general rubbish.

The Glass Scratch Remover Repair System successfully removed the scratch within 30–40 minutes, restoring the glass to a clear, distortion-free finish. The glass was able to remain in place with no need for replacement, and a quick and effortless clean-up.