GLASS ETCHING SYSTEM STEP 3 GEL
ETCH-G
Please register or log in to place an order.
Etching System, Etching and Fratelli Stencil Systems, New Products
The Glasscorp Glass Etching System utilises the latest in chemical techniques (Step 1 Spray (ETCH-SP), Step 3 Gel (ETCH-G) and computer generated stencils (Step 2 Stencil (ETCH-S)), providing a way to appropriately mark glass to meet legal requirements.
Glasscorp Glass Etching System is an easy to use, portable, fully mobile and no mess system. It has a low setup cost and no compressor is required. With this system there is no risk of scratching aluminium or other forms of paintwork.
Do not use if gel becomes dark as its viscosity and/or effectiveness may change.
Features
- 45ml
- Bottle with dabber head
- Easy to use
Instructions
- Clean glass surface to be etched with Universal Glass Cleaner (GCGC) or Hi-Sheen Glass Cleaner (HSGC). Spray Glass Etching System Step 1 Spray (ETCH-SP) onto the glass surface (or on the shiny side of the Stencil). DO NOT allow the spray to evaporate before moving to Step 2.
- Place the shiny side of the Stencil onto the glass (shiny side DOWN). Force out residual or any bubbles with the card. Let the Stencil dry to fully adhere for 2 minutes.
- Dab Glass Etching System Step 3 Gel (ETCH-G) on top of Stencil. Dab and repeat with multiple coats (2-3 coats). Ensuring the gel is away from the stencil edge. Leave for 5 minutes.
- Remove the Stencil using the card to lift the corner enabling it to be removed in one motion. Spray with GCGC or HSGC and wipe glass with a paper towel or a rag to remove all remaining gel.
Applications
- To easily and appropriately mark glass to meet legal requirements
Notes
- Customers should independently determine the suitability of this product for their specific purpose prior to use
