Home Autoglass Automotive Tapes/Films and Setting Blocks Butyl Tapes

GLASS ETCHING SYSTEM STEP 2 STENCIL

ETCH-S

Please register or log in to place an order.

Category Etching System, Etching and Fratelli Stencil Systems, New Products

The Glasscorp Glass Etching System utilises the latest in chemical techniques (Step 1 Spray (ETCH-SP), Step 3 Gel (ETCH-G)) and computer generated stencils (Step 2 Stencil (ETCH-S)), providing a way to appropriately mark glass to meet legal requirements.

Glasscorp Glass Etching System is an easy to use, portable, fully mobile and no mess system that can be used in all weather. It has a low setup cost and no compressor is required. With this system there is no risk of scratching aluminium or other forms of paintwork.

Features

Sheet of 18 stencils
Each stencil is 45mm (w) x 38mm (h)
Easy to use

Instructions - State the required text in the comments field

Auto Glass text:

Line 1: Company name
Line 2: Company location
Line 3: Standard
Line 4: Glass type
Line 5: Current year

Household Glass text:

Line 1: Glass type
Line 2: Glass type
Line 3: Standard
Line 4: Glass grade
Line 5: Company name

Instructions

Clean glass surface to be etched with Universal Glass Cleaner (GCGC) or Hi-Sheen Glass Cleaner (HSGC). Spray Glass Etching System Step 1 Spray (ETCH-SP) onto the glass surface (or on the shiny side of the Stencil). DO NOT allow the spray to evaporate before moving to Step 2.
Place the shiny side of the Stencil onto the glass (shiny side DOWN). Force out residual or any bubbles with the card. Let the Stencil dry to fully adhere for 2 minutes.
Dab Glass Etching System Step 3 Gel (ETCH-G) on top of Stencil. Dab and repeat with multiple coats (2-3 coats). Ensuring the gel is away from the stencil edge. Leave for 5 minutes.
Remove the Stencil using the card to lift the corner enabling it to be removed in one motion. Spray with GCGC or HSGC and wipe glass with a paper towel or a rag to remove all remaining gel.

Applications