GLASS ETCHING SYSTEM STEP 1 SPRAY
ETCH-SP
Please register or log in to place an order.
Etching System, Etching and Fratelli Stencil Systems, New Products
The Glasscorp Glass Etching System utilises the latest in chemical techniques (Step 1 Spray (ETCH-SP), Step 3 Gel (ETCH-G) and computer generated stencils (Step 2 Stencil (ETCH-S)), providing a way to appropriately mark glass to meet legal requirements.
Glasscorp Glass Etching System is an easy to use, portable, fully mobile and no mess system. It has a low setup cost and no compressor is required. With this system there is no risk of scratching aluminium or other forms of paintwork.
Features
- 60ml
- Spray bottle
- Application card with link to application instructions
- Easy to use
Instructions
- Clean glass surface to be etched with Universal Glass Cleaner (GCGC) or Hi-Sheen Glass Cleaner (HSGC). Spray Glass Etching System Step 1 Spray (ETCH-SP) onto the glass surface (or on the shiny side of the Stencil). DO NOT allow the spray to evaporate before moving to Step 2.
- Place the shiny side of the Stencil onto the glass (shiny side DOWN). Force out residual or any bubbles with the card. Let the Stencil dry to fully adhere for 2 minutes.
- Dab Glass Etching System Step 3 Gel (ETCH-G) on top of Stencil. Dab and repeat with multiple coats (2-3 coats). Ensuring the gel is away from the stencil edge. Leave for 5 minutes.
- Remove the Stencil using the card to lift the corner enabling it to be removed in one motion. Spray with GCGC or HSGC and wipe glass with a paper towel or a rag to remove all remaining gel.
Applications
- To easily and appropriately mark glass to meet legal requirements
Notes
- Customers should independently determine the suitability of this product for their specific purpose prior to use
