GLASS ETCHING SYSTEM - GEL (STEP 3)

ETCH-G

Please register or log in to place an order.

Category Etching System, Etching and Fratelli Stencil Systems, New Products

Glasscorp Glass Etching System is an easy to use, portable, fully mobile and no mess system. It utilises the latest in chemical techniques, providing a way to appropriately mark and identify glass to meet legal requirements. It has a low setup cost and no compressor is required. With this system there is no risk of scratching aluminium or other forms of paintwork. The computer generated stencils can be customised to meet customer requirements.

The system features a 4 step process:

Step 1 - Prepare Glass (GCGC/HSGC) & Apply Spray (ETCH-SP)
Step 2 - Apply Stencil (ETCH-S)
Step 3 - Apply Gel (ETCH-G)
Step 4 - Remove Stencil & Clean up

Caution: Do not use if gel becomes dark as its viscosity and/or effectiveness may change

Features

45ml
Bottle with dabber head
Easy to use

Application Instructions

Clean glass surface to be etched with Universal Glass Cleaner (GCGC) or Hi-Sheen Glass Cleaner (HSGC). Spray surface (or on the shiny side of the Stencil) with the Step 1 Spray (ETCH-SP). DO NOT allow the spray to evaporate before moving to Step 2.
Place the shiny side of the Stencil (ETCH-S) onto the glass (shiny side DOWN). Force out residual liquid or any bubbles with the card. Let the Stencil dry for 2 minutes to fully adhere.
Dab the Step 3 Gel (ETCH-G) on top of Stencil. Dab and repeat with 2-3 coats, ensuringing the gel is away from the stencil edge. Leave for 5 minutes.
Remove the Stencil using the card to lift the corner, enabling it to be removed in one motion. Spray surface with Universal Glass Cleaner or Hi-Sheen Glass Cleaner and wipe with a paper towel or a rag to remove all remaining gel.

Applications