CONSTRUCTION MASKING TAPE - 24mm
MT24E
Please register or log in to place an order.
Masking Tape, Masking Tapes, Masking Tapes, Promotion
Made from fibre reinforced, ultra thin premium Japanese Washi paper and coated with a specially primed acrylic adhesive. The heavier coat weight of acrylic adhesive is designed for light moisture, textured or uneven surfaces.
Features
- 24mm
- 55m per roll
- Orange
- Surface type: Smooth (glossy) to textured
- Extra high adhesion level
- Suited to exterior use on most non flaky surfaces which maybe textured or uneven
- Designed with extra initial tack to adhere (where possible) to lightly moisture, damp dew covered surfaces - recommended to remove excess moisture from surface before application
- The ultra thin Washi paper backing allows for sharp finish lines without paint build and good resistance against paint bleed through
- UV and weather resistance up to 60 days exposure with clean removal from most surfaces (subject to stated use conditions)
- Compatible with most paint systems
- Highly visible orange Washi paper colour
- Cold surface masking - masking surface areas that are cold and difficult to bond to
- Tear resistant for easy application and removal without breaking
Applications
- Designed for exterior use conditions, ability to mask off on damp, textured or uneven surfaces areas
- Typically used on non flaky woodwork, most metal surfaces, glass and plastic
- Can be used for masking sealants and silicones to give a clean sharp edges
- Suitable for various straight line striping, pattern and design applications
Surface Preparation
The surfaces to be bonded must be dry and free from any contamination including dust, oils, fats, oxidisation, release agents and any other known contamination. The correct choice of surface cleaner depends on the surface properties. Essentially non-greasy cleaners are recommended including isopropanol alcohol (mixed 50/50 with clean water). Cleaning cloths must be clean, grease and fat free with no loose fibres or cloth particles. The bond strength is dependent upon the contact pressure of the adhesive to substrate. To assist this process all adhesive tapes require firm hand or roller pressure.
Notes
- Customers should independently determine the suitability of this product for their specific purpose prior to use
- Substrate testing recommended to ensure suitability and safe removal
- Do not use on poorly bonded surfaces, always pre-test to assess suitability
