BACKING ROD - 13mm x 50m
TR20
Please register or log in to place an order.
Backing Rods, Backing Rods
A round, flexible, closed-cell polyethylene foam with an exterior skin used as a backing and thickness control device for elastomeric and other cold-applied sealants. Backing Rod becomes an integral part of the joint into which it is installed. Available sizes 6mm to 50mm. The backing rod should be installed allowing sealant to be tooled to a proper joint width to depth ratio. Backing rod should be sized ~25% larger than the joint opening, to provide sufficient backpressure during sealant installation. Closed-cell polyethylene backing rod may outgas if punctured during installation, requiring it to be left for 20 minutes before application of the sealant.
Features
- Easy to install
- Allows easy control of sealant application depth
- Will not adhere to sealants - no additional bond breaker needed
- Compatible with most cold-applied sealants
- Weather resistant
- 100% New Zealand made
- 100% Recyclable
Applications
- Used as a backing and thickness control device for elastomeric and other cold-applied sealants
Notes
- Standard colour is grey
- Customers should independently determine the suitability of this product for their specific purpose prior to use
