Glass Etching System - Application Instructions

1. Preparing the glass surface
2. Applying the Stencil
3. Applying the Etching Gel
4. Removing the Stencil

Clean the glass surface to be etched with Universal Glass Cleaner (GCGC) or Hi-Sheen Glass Cleaner (HSGC).

 

Spray Glass Etching System Step 1 Spray (ETCH-SP) onto the glass surface (or on the shiny side of the Stencil).

NOTE:  DO NOT allow the spray to evaporate before moving to Step 2.

 

Place the shiny side of the Stencil onto the glass (shiny side DOWN).

  

Force out residual liquid or any bubbles with the card.

Let the Stencil dry for 2 minutes to fully adhere.

Dab Glass Etching System Step 3 Gel (ETCH-G) on top of the Stencil.
Dab and repeat with multiple coats (2-3 coats).

Ensuring the Gel is away from the Stencil edge.

Leave for 5 minutes.

NOTE
Shelf life of Glass Etching System Step 3 Gel (ETCH-G) will vary depending on storage, typically 6 - 9 months for unopened bottles.
After opening, use within 3 months.
Do not use if gel becomes dark.

Remove the Stencil using the card to lift the corner enabling it to be removed in one motion. 

Spray with Universal Glass Cleaner (GCGC) or Hi-Sheen Glass Cleaner (HSGC) and wipe glass with a paper towel or a rag to remove all remaining gel.